12v 2a 4a 8a 7-stage Automatic Smart Battery Charger Long Battery Life Microprocessor Control Suitable For Most Battery Types UK Plug

Name: battery charger
Colour: Black
Material: ABS
Battery type: lead acid battery
Input parameter 180-240V
Model EU-Plug,UK-Plug
2A rechargeable motorcycle battery, 4A rechargeable car battery, 8A rechargeable SUV car battery.
Charger for Battery Size: 2A for 6AH - 30AH; 4A for 20AH - 60AH; 8A for 40Ah - 160AH
• Cooling : Natural convection
• Input voltage: 180-260V AC, 50Hz
• Rated output: 12V DC, 2A/4A/8A
• The 7 stages are: Desulphation ; Soft Start; Bulk; Absorption; Battery Test; Recondition and Float.
• Battery range: 6AH - 160Ah
• Thermal protect (fan on): 65'C+/-5'C
• Cooling fan: Automatic temperature controlled.
• Efficiency: App. 85%.
• Compliant standards: CB, CE, IEC60335, EN61000, EN55014
• Dimension (L×W×H): 205×90×55mm
• Weight: 900g
1. Desulphation
The Desulphation stage may break down sulphation that occurs in batteries that have been left flat for extended periods of time, returning them back to full charge. sulphation occurs when lead-sulphate hardens and clogs up the battery cells.
2. Soft Start
A preliminary charge processes that gently introduce power to the battery. This protects the battery and increases battery life.
3. Bulk (Constant Current)
Bulk mode charges the battery at the maximum rate (constant current) putting a large amount of power into the battery in a short amount of time. This stage will charge the battery to approximately 80%, until the voltage reaches rated volts for 12V charger
4. Absorption (Constant Voltage)
The charge rate slows down so the battery can absorb more power and reach 100% charge. The voltage remains at a constant volts for 12V charger while the current is gradually reduced until no more power can be added without over-charging the battery.
5. Battery Test
An automatic battery test is conducted immediately after the absorption stage. The test monitors the voltage for 90 seconds to determine if the charge was successful.
6. Recondition
The battery reconditioning function is initiated automatically in the case that the battery fails the battery test (stage 5). Failing the battery test indicates that the absorption stage was unable to fully charge the battery. The recondition mode will then begin to introduce a low constant current for a period of 4 hours. Then the charger will go into float charging mode.
7. Float
The Float stage maintains the battery at 100% charge without overcharging or damaging the battery. This means the charger can be left connected to the battery indefinitely.
Packing list:
1 x Battery Charger
Note:
Before buying, please carefully check the model of the product to prevent unsuitability in the later period

SHIPPING

• Complimentary ground shipping within 1 to 7 business days
• Next-day and Express delivery options also available
• See the delivery FAQs for details on shipping methods, costs and delivery times

30 DAYS MONEY BACK GUARANTEE

Did you receive the wrong or non-compliant product? You will have the opportunity to receive it again at no cost.

Contact us and communicate your request.

*All shipping times exclude customs delays.